PC/CP300 Electronics Laboratory II
Other Sensors Building Blocks
- Wire up an LM7805 regulator with one of the distance sensors
to
show that the supply voltage to the sensor is a steady 5V as the
input supply
voltage varies from 7V to 12V.
- Also using the LM7805 regulator, wire up your light sensor
so that the output voltage goes from less that 1V to more than
4V as the light changes between normal room light and the
flashlight.
You may find it helpfult to use one of your previous op-amp
building blocks to help with this.
Demonstrate your working blocks at the next lab period.
Wilfrid Laurier University
© 2019 Wilfrid Laurier University