PC/CP300 Electronics Laboratory II
Digital-to-Analog and
Analog-to-Digital Converters Postlab Requirements
- Design an op-amp signal conditioning circuit to
modify the ADC circuit to allow inputs in the range -10V to +10V.
Note the ± 10V must be safely converted to the
voltage range expected by the ADC.
Explain how the signal conditioning circuit operates.
- Look at Figure 10. A/D Tester with
Analog Error Output on page 25 of the
ADC0804 datasheet. Explain how
the circuit operates (circuit description).
- Summarize all the key points from the lab. I
strongly recommend that you do this within 24 hours of
completing the lab. You are summarizing what you
learned from the lab experience,
not the assigned readings.
- Photocopy your summary and submit it with your
post-lab questions to the instructor
at next week's lecture.
Wilfrid Laurier University
© 2019 Wilfrid Laurier University