PC221 Analog Electronics I Lab; DC Circuits


  1. Print your schematic and write the voltages and currents on it.

    On the schematic, add arrows to show the direction for each current, so all of the currents can be positive.

    Include your values from the analysis, from both measurements, and from the simulation. Use different coloured pens or highlighters to make it easy to identify which value is from which source.
    (Be sure to include a legend for this.)
  2. Summarize what you learned doing the lab. I strongly recommend that you do this within 24 hours of completing the lab. You are summarizing the lab experience not the assigned readings. The summary should be:
    • in point form
    • in your lab notebook
    • maximum 2 pages.
  3. Submit your schematic and a photocopy of your summary to the lab instructor at next week's lab.


To view pdf documents, you can download Adobe Acrobat Reader .
get Acrobat Reader
If you need to update a browser, you might try Firefox which is
  • free
  • open source
  • available for several platforms
Get Firefox!
Since this page uses cascading style sheets for its layout, it will look best with a browser which supports the specifications as fully as possible.

If you are looking for an office package, with a word processor, spreadsheet, etc., you might try LibreOffice which is
  • free
  • open source
  • available for several platforms
Get LibreOffice!

Go to the main page for the Department of Physics and Computer Science.

Valid XHTML 1.1

Valid CSS!

(Level AA)

Wilfrid Laurier University