Pages created and updated by Terry Sturtevant Date Posted: May 12, 2017


PC/CP120 Digital Electronics Lab

Project Preparation Part 1 (of 2)

Objective:

To download and test project circuit using a CPLD with the debugger board.
If that is successful, then wire and test appropriate input and output devices.

Background:

If you can verify that your CPLD is working correctly, then you'll be well prepared for wiring up the inputs and outputs, this period or next.



cpld task i/o

Task:

Step 1: Program the CPLD with your completed Phase III circuit.

Step 2: Use the debugger board for inputs and outputs.

Step 3: Test all input combinations to see that your CPLD performs as expected.

Step 4: Once you have verified that the CPLD is correct, if time permits, you can wire up your chosen input and output devices.

If you get your circuit working with your chosen input and output devices before the end of the lab, demonstrate your working prototype to the lab demonstrator.

Resources

To view pdf documents, you can download Adobe Acrobat Reader .
get Acrobat Reader
If you need to update a browser, you might try Firefox which is Get Firefox!
Since this page uses cascading style sheets for its layout, it will look best with a browser which supports the specifications as fully as possible.

If you are looking for an office package, with a word processor, spreadsheet, etc., you might try LibreOffice which is Get LibreOffice!

Go to the main page for the Department of Physics and Computer Science.

Valid XHTML 1.1

Valid CSS!

WCAG 2.0
(Level AA)

Wilfrid Laurier University