CP400P Wireless Communication and Networks
Project Week II
Objectives
- To become familiar with the UART on the Arduino.
- To send output to the LCD display.
Equipment
- Arduino Uno board
- Sharp LCD display
- GPS or RFID
Procedure
Setup
- Use one of the Serial examples to establish UART
communication with the device.
From the device data sheet, what baud rate is required?
Does the device produce correct serial output as is, or do the
bits need to be flipped?
- Send the output from the device to the LCD to display.
Demonstrate your working program to
the lab instructor.
Show your pin assignments on the diagram.
Wilfrid Laurier University
© 2019 Wilfrid Laurier University